Solar Desalination

  • Product Code: Product 4
  • Availability: In Stock

  • Availability: In Stock
  • $2,995.00
  • $2,995.00

  • Ex Tax: $2,995.00
Product Description
The Aquasolar sea water & brackish well water reverse osmosis systems Series EXODUS are designed for commercial and residential applications where floor space is at a premium. All major system elements are mounted within a sturdy tubular stainless steel frame, welded for long term rigidity and open for easy access to all components. The Aquasolar sea water filter system Series EXODUS is a compact, heavy duty sea water R.O. water purifier for users requiring 500, 1500, up to 10,000 gallons per day water production. As with all of our purifier products, The Aquasolar system is fully equipped with the instruments and controls needed for reliable long term operation. Aquasolar features include:    Stainless steel frame, structural ABS

control panel    

Caster wheels for mobile portability - Each EXODUS unit is equipped with wheels for portability 316 SS

High pressure pump with safety relief valve   

Fiber reinforced 1000 PSI pressure vessel 20" Prefilter for 2.5"x20" cartridge   

Quick connect brine and product connections   

Prefilter in & out and membrane vessel in & out pressure gauges   

Product water flowmeter   

Brine flow meter   

High Pressure control SS needle valve   

Panel mounted digital TDS product water quality monitor   

Portable Superior Water Quality Monitoring: Allows you to easily test your water before and after the EXODUS-1000.

Portable waterproof tester offers high accuracy electrical conductivity (EC), total dissolved solids (TDS) and temperature measurements in a single tester!   

Low energy, thin film sea water membrane element   

Microprocessor system controller   

Automatic product water membrane flush - Clean water flushes the membrane upon start-up   

New Separate Feature: Water Alarm now included with every EXODUS- 1000 Order.

Portable water leak detection/water alarm system - Helps detects water leaks and moisture. Sounds a loud alarm when water is detected. Includes 6ft of wire attached to the sensor and up to 100 feet of additional wire can be spliced into the line. Perfect for monitoring from your office or work area. 


Dimensions: 22"W x 26"D x 49"H   

Weight: 170 lbs.   

Output*: 1000 GPD, 0.70 GPM - *Based on typical 35,000 ppm feed sea water at 72 degrees F   

Membrane: 1 Low energy, high rejection thin film sea water type    Dissolved Solids Rejection: 98-99%   

Prefilter: 10 micron polypropylene depth type   

Power Req.: 200 Watt Solar Panel   

Connections: Feed - 3/4" FPT, product and brine - 1/2" tube   

System Control: Microprocessor control by product tank level and feed pressure. Also provides product TDS monitoring.   

Salinity Monitoring: Automatic electronic monitoring. Temperature compensated with the digital continuous readout.

The salinity monitoring components of the system provide TDS readout in ppm (parts per million) of product water.   

Salinity Range: Designed for seawater use up to 50,000PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)   

Automatic Membrane Flush: Membranes flushed with product water for 5 min. after every shutdown   

Temperature Range: Max. 113oF / 45oC, Min. 33oF / .5oC   

** Required System Inlet Feed Water Flow: 6 gpm - If you do not have  a well pump or inlet delivery pump a Booster Pump Will Be Required - On the sea water/well water systems there is almost always a need for a boost pump to deliver the sea or well water to the R.O. and a pretreatment sand filter before the R.O.   

System Feed Water Pressure: Minimum 25 psi /1.8 bar, Maximum 80 psi /5.6 bar   

RO System Operating Pressure (sea water): Nominal 700 psi / 49 bar pH Range: 3-11 (typical seawater pH is 8)   

Operating Parameters: TDS-35000ppm, Total iron is less than .2ppm,       

Manganese is less than .04ppm, Water hardness below 10gpg. Chlorine tolerance: 0.1 PPM.

Write a review

Note: HTML is not translated!
    Bad           Good